There is a black RJ45 port on the rear panel of the equipment. That can be used to connect the equipment to the host computer. You can connect them directly, or through some other LAN device, like a router, switch or hub. If you are using MODE #1 from diagram below and your equipment is either the BTS 3000 or BFGS, this RJ45 cable should be a crossover cable. If using MODE #2, either a straight through or crossover cable will work.
1.Duplicate IP addresses of the equipment or the host computer will result in data loss or some other unexpected errors.
2.Deploying the testing equipment and host computer in an isolated LAN is highly recommended for data security.
RJ45 Cable Wiring