BTS Overview

Generally, Neware battery testing system BTS consists of the following components:

  • Neware tester, including embedded or external middle machine, auxiliary channel cabinet.
  • Power plugs.
  • Battery clamps.
  • Communication cables. Switches may be included if multiple testers are purchased.
  • CDROM. Including software, tools, patches and user manual.
  • Computer, Monitor or UPS (if purchased).

Equipment Diagram

Below diagram represents the basic inner architecture of our BTS series. BFGS, ES and EVT series differ from below diagram.

BTS module diagram BTS Module Diagram

Front Fanel

below figure shows a typical front panel, including universal battery holders and a 164 air socket for attaching alternate testing cables.

BTS Front Panel
BTS Front Panel

①Power and Signal LED
②Power On/Off
③Channel Working LED
④Universal Holder
⑤164 Air Socket
⑥Holder Height Adjustment Screw
⑦Channel Polarity Label

Rear Panel

BTS Rear Panel
BTS Rear Panel

①Communication Port
②Power Socket
③Equipment Information Label

Equipment Information Label

Equipment Information Label
Equipment Information Label

Part Number Explanation

Part Number Explanation
Part Number Explanation

①Series. T-3 means BTS 3000; E-6 means EVT 6000 and etc.
②Channel quantity
③Cabinet color. W means White and as the default, B means Black
④Voltage and current output range
⑤Fixture Type and other function
  • N: Network, means there are embedded Middle Machine(s) enabling system operation over TCP/IP.
  • A: Anti-reverse, means system will protect battery from being operated while connected in reverse, i.e. system permits ONLY positive voltage (voltage sensing is on current cable) input.
  • F: Negative power supply enabling you to discharge battery to 0V, or even lower.
  • T: Temperature. Means system have embedded auxiliary temperature units.
  • V: Voltage. Means system has embedded auxiliary voltage units.
  • A1: Universal holder with Sharp voltage sense probes for battery with Aluminum case (Negative up and positive bottom).
  • A4: Universal holder with Round voltage sense probes for battery with Aluminum case (Negative up and positive bottom).
  • S1: Universal holder with Sharp voltage sense probes for battery with Steel case (Positive up and negative bottom).
  • S4: Universal holder with Round voltage sense probes for battery with Steel case (Positive up and negative bottom).

Battery Clamp

Neware provides various kinds of battery clamps, such as: universal holders, alligator clips, polymer clamps, ring terminal connectors and other types specified by the customer. Here, only the four most common types are listed below for your reference.